Deployment Guide

To disable periodic re-authentication, use the no dot1x reauthentication command.
Parameters
interval seconds (Optional) Enter the keyword interval then the interval time, in seconds, after
which re-authentication is initiated. The range is from 1 to 31536000 (1 year). The
default is3600 (1 hour).
Defaults 3600 seconds (1 hour)
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
interface range — configures a range of interfaces.
dot1x reauth-max
Configure the maximum number of times a port can re-authenticate before the port becomes unauthorized.
C9000 Series
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
number Enter the permitted number of re-authentications. The range is from 1 to 10. The
default is 2.
Defaults 2
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
1546 Security