Deployment Guide

password-attributes
Configure the password attributes (strong password).
C9000 Series
Syntax
password-attributes [min-length number] [max-retry number] [lockout-period
minutes][character-restriction [upper number] [lower number] [numeric
number] [special-char number]]
To return to the default, use the no password-attributes [min-length number]
[max-retry number] [lockout-period minutes] [character-restriction [upper
number] [lower number] [numeric number] [special-char number]] command.
Parameters
min-length
number
(OPTIONAL) Enter the keywords min-length then the number of characters.
The range is from 0 to 32 characters.
max-retry
number
(OPTIONAL) Enter the keywords max-retry then the number of maximum
password retries. The range is from 0 to 16.
lockout-period
minutes
(OPTIONAL) Enter the keyword lockout-period then the number of minutes.
The range is from 1 to 1440 minutes. The default is 0 minutes and the lockout-
period is not enabled. This parameter enhances the security of the switch by
locking out sessions on the Telnet or SSH sessions for which there has been a
consecutive failed login attempts. The console is not locked out.
character-
restriction
(OPTIONAL) Enter the keywords character-restriction to indicate a
character restriction for the password.
upper number (OPTIONAL) Enter the keyword upper then the upper number. The range is from
0 to 31.
lower number (OPTIONAL) Enter the keyword lower then the lower number. The range is from
0 to 31.
numeric number (OPTIONAL) Enter the keyword numeric then the numeric number. The range is
from 0 to 31.
special-char
number
(OPTIONAL) Enter the keywords special-char then the number of special
characters permitted. The range is from 0 to 31.
Defaults 0 minutes for the lock out period. The lockout-period is not enabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced the lockout-period option on the Z9500.
9.5(0.0) Introduced the lockout-period option on the Z9000, S6000, S4820T, S4810,
and MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
Security 1517