Deployment Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1491

Table Of Contents

Dell EMC Networking Command-Line Reference Guide for the C9010 Series Version 9.14.2.1
About this Guide
- Objectives
- Audience
- Conventions
- Information Icons
CLI Basics
- Accessing the Command Line
- Multiple Configuration Users
- Obtaining Help
- Navigating the CLI
- Using the Keyword no Command
- Filtering show Commands
- Command Modes
Control and Monitoring
- asf-mode
- banner exec
- banner login
- banner motd
- cam-acl
- cam-audit linecard
- clear alarms
- clear average-power
- clear line
- configure
- debug cpu-traffic-stats
- debug ftpserver
- disable
- do
- enable
- enable cpu-clock-monitor
- enable optic-info-update interval
- end
- exec-timeout
- exit
- ftp-server enable
- ftp-server topdir
- ftp-server username
- hostname
- ip ftp password
- ip ftp source-interface
- ip ftp username
- ip http source-interface
- ip telnet server enable
- ip telnet source-interface
- ip tftp source-interface
- line
- logging coredump server
- login concurrent-session
- login statistics
- ping
- power on
- reload
- send
- service timestamps
- show alarms
- show asf
- show chassis
- show command-history
- show console lp
- show cpu-traffic-stats
- show cpu-interface-stats
- show debugging
- show environment
- show inventory
- show linecard
- show login statistics
- show memory
- show processes cpu
- show processes ipc
- show processes ipc flow-control
- show processes memory
- show reset-reason
- show rpm
- show software ifm
- show system linecard
- show tech-support
- show util-threshold cpu
- show util-threshold memory
- show version
- telnet
- terminal length
- traceroute
- undebug all
- upload trace-log
- util-threshold cpu
- util-threshold memory
- virtual-ip
- write
File Management
- boot system
- cd
- copy
- delete
- dir
- format flash
- mkdir
- mount nfs
- pwd
- rename
- restore factory-defaults
- rmdir
- show boot bmp
- show boot system
- show bootvar
- show file
- show file-systems
- show os-version
- show running-config
- show startup-config
- upgrade
- upgrade system-image-os6
- verify
802.1X
- debug dot1x
- dot1x auth-fail-vlan
- dot1x auth-server
- dot1x auth-type mab-only
- dot1x authentication (Configuration)
- dot1x authentication (Interface)
- dot1x critical-vlan
- dot1x guest-vlan
- dot1x host-mode
- dot1x mac-auth-bypass
- dot1x max-eap-req
- dot1x max-supplicants
- dot1x port-control
- dot1x profile
- dot1x quiet-period
- dot1x reauthentication
- dot1x reauth-max
- dot1x server-timeout
- dot1x static-mab
- dot1x supplicant-timeout
- dot1x tx-period
- mac
- show dot1x cos-mapping interface
- show dot1x interface
- show dot1x profile
Access Control Lists (ACL)
- Commands Common to all ACL Types
  - remark
  - show config
- Common IP ACL Commands
- Standard IP ACL Commands
- Extended IP ACL Commands
- ACL VLAN Group Commands
- Common MAC ACL Commands
- Standard MAC ACL Commands
- Extended MAC ACL Commands
- IP Prefix List Commands
- Route Map Commands
- AS-Path Commands
  - ip as-path access-list
  - show ip as-path-access-lists
- IP Community List Commands
  - ip community-list
  - show ip community-lists
Bidirectional Forwarding Detection (BFD)
- bfd all-neighbors
- bfd disable
- bfd enable (Configuration)
- bfd enable (Interface)
- bfd interval
- bfd protocol-liveness
- ip route bfd
- ipv6 route bfd
- ip ospf bfd all-neighbors
- ipv6 ospf bfd all-neighbors
- neighbor bfd
- neighbor bfd disable
- show bfd neighbors
- vrrp bfd
Border Gateway Protocol
- BGP IPv4 Commands
- MBGP Commands
- BGP Extended Communities (RFC 4360)
- IPv6 BGP Commands
- IPv6 MBGP Commands
  - show ipv6 mbgproutes
Content Addressable Memory (CAM)
- CAM Profile Commands
- Unified Forwarding Table Modes
  - show hardware forwarding-table mode
  - hardware forwarding-table mode
Control Plane Policing (CoPP)
- clear control-traffic protocol
- clear control-traffic queue
- control-plane-cpuqos
- service-policy rate-limit-cpu-queues
- service-policy rate-limit-protocols
- show control-traffic protocol
- show control-traffic queue
- show cpu-queue rate
- show ip protocol-queue-mapping
- show ipv6 protocol-queue-mapping
- show mac protocol-queue-mapping
- show protocol-queue-mapping
Data Center Bridging (DCB)
- DCB Commands
  - dcb-enable
- PFC Commands
- ETS Commands
- DCBX Commands
- dcb-map
- priority-pgid
- priority-group bandwidth pfc
- dcb-map stack-unit all stack-ports all
- dcb pfc-shared-buffer-size
- dcb-buffer-threshold
- priority
- qos-policy-buffer
- dcb-policy buffer-threshold (Interface Configuration)
- show qos dcb-buffer-threshold
- show hardware stack-unit buffer-stats-snapshot
- dcb pfc-total-buffer-size
- show running-config dcb-buffer-threshold
- dcb pfc-queues
- dcb {ets | pfc} enable
Debugging and Diagnostics
- Offline Diagnostic Commands
- Hardware Commands
Dynamic Host Configuration Protocol (DHCP)
- Configure a DHCP Server and DHCP Clients
- Configure Secure DHCP and DHCP Relay
Equal Cost Multi-Path (ECMP)
- ecmp-group
- hash-algorithm ecmp
- hash-algorithm hg
- hash-algorithm hg-seed
- hash-algorithm seed
- ip ecmp-group
- ip ecmp weighted
- link-bundle-distribution trigger-threshold
- link-bundle-monitor enable
- show config
- show link-bundle distribution
FCoE Transit
- clear fip-snooping database interface vlan
- clear fip-snooping statistics
- debug fip snooping
- debug fip snooping rx
- feature fip-snooping
- fip-snooping enable
- fip-snooping fc-map
- fip-snooping max-sessions-per-enodemac
- fip-snooping port-mode fcf
- fip-snooping port-mode fcoe-trusted
- show fip-snooping config
- show fip-snooping enode
- show fip-snooping fcf
- show fip-snooping sessions
- show fip-snooping statistics
- show fip-snooping system
- show fip-snooping vlan
FIPS Cryptography
- fips mode enable
- show fips status
- show ip ssh
- ssh
Flex Hash and Optimized Boot-Up
- encapsulation dot1q
- lacp fast-switchover
- load-balance flexhash
- load-balance ingress-port enable
Force10 OS Resilient Ring Protocol (FRRP)
- clear frrp
- debug frrp
- description
- disable
- interface
- member-vlan
- mode
- protocol frrp
- show frrp
- timer
GARP VLAN Registration (GVRP)
- clear gvrp statistics
- debug gvrp
- disable
- garp timers
- gvrp enable
- gvrp registration
- protocol gvrp
- show config
- show garp timers
- show gvrp
- show gvrp statistics
High Availability (HA)
- redundancy auto-failover-limit
- redundancy disable-auto-reboot
- redundancy force-failover
- redundancy primary
- redundancy reset-counter
- redundancy synchronize
- show redundancy
ICMP Message Types
Interfaces
- Basic Interface Commands
- Egress Interface Selection (EIS) Commands
- Port Channel Commands
- HiGig Port Channel Commands
- Time Domain Reflectometer (TDR) Commands
  - tdr-cable-test
  - show tdr
Intermediate System to Intermediate System (IS-IS)
- adjacency-check
- advertise
- area-password
- clear isis
- clns host
- debug isis
- debug isis adj-packets
- debug isis graceful-restart
- debug isis local-updates
- debug isis snp-packets
- debug isis spf-triggers
- debug isis update-packets
- default-information originate
- description
- distance
- distribute-list in
- distribute-list out
- distribute-list redistributed-override
- domain-password
- graceful-restart ietf
- graceful-restart interval
- graceful-restart restart-wait
- graceful-restart t1
- graceful-restart t2
- graceful-restart t3
- hello padding
- hostname dynamic
- ignore-lsp-errors
- ip router isis
- ipv6 router isis
- isis circuit-type
- isis csnp-interval
- isis hello-interval
- isis hello-multiplier
- isis hello padding
- isis ipv6 metric
- isis metric
- isis network point-to-point
- isis password
- isis priority
- is-type
- log-adjacency-changes
- lsp-gen-interval
- lsp-mtu
- lsp-refresh-interval
- max-area-addresses
- max-lsp-lifetime
- maximum-paths
- metric-style
- multi-topology
- net
- passive-interface
- redistribute
- redistribute bgp
- redistribute ospf
- router isis
- set-overload-bit
- show config
- show isis database
- show isis graceful-restart detail
- show isis hostname
- show isis interface
- show isis neighbors
- show isis protocol
- show isis traffic
- spf-interval
Internet Group Management Protocol (IGMP)
- IGMP Commands
- IGMP Snooping Commands
Internet Protocol Security (IPSec)
- crypto ipsec transform-set
- crypto ipsec policy
- management crypto-policy
- match
- session-key
- show crypto ipsec transform-set
- show crypto ipsec policy
- transform-set
IPv4 Routing
- arp
- arp backoff-time
- arp learn-enable
- arp retries
- arp timeout
- clear arp-cache
- clear host
- clear ip fib linecard
- clear ip route
- clear ip traffic
- clear tcp statistics
- debug arp
- debug ip dhcp
- debug ip icmp
- debug ip packet
- deny arp (for Extended MAC ACLs)
- icmp6-redirect enable
- ip address
- ip directed-broadcast
- ip domain-list
- ip domain-lookup
- ip domain-name
- ip helper-address hop-count disable
- ip host
- ip max-frag-count
- ip name-server
- ip proxy-arp
- ip route
- ip source-route
- ip unreachables
- ipv4 unicast-host-route
- load-balance
- management route
- show arp
- show arp retries
- show hosts
- show ip cam linecard
- show ip fib linecard
- show ip flow
- show ip interface
- show ip management-route
- show ipv6 management-route
- show ip protocols
- show ip route
- show ip route list
- show ip route summary
- show ip traffic
- show tcp statistics
IPv6 Access Control Lists (IPv6 ACLs)
- cam-acl
- cam-acl-egress
- clear counters ipv6 access-group
- deny (for IPv6 ACLs)
- deny icmp (for Extended IPv6 ACLs)
- deny tcp (for IPv6 ACLs)
- deny udp (for IPv6 ACLs)
- ipv6 access-list
- ipv6 control-plane egress-filter
- permit (for IPv6 ACLs)
- permit icmp (for IPv6 ACLs)
- permit tcp (for IPv6 ACLs)
- permit udp (for IPv6 ACLs)
- seq (for IPv6 ACLs)
- show cam-usage
- show ipv6 access-list
- show ipv6 accounting access-list
- show running-config
IPv6 Basics
- cam-ipv6 extended-prefix
- clear ipv6 fib
- clear ipv6 mld_host
- clear ipv6 neighbors
- ipv6 address
- ipv6 address autoconfig
- ipv6 address eui64
- ipv6 control-plane icmp error-rate-limit
- ipv6 flowlabel-zero
- ipv6 host
- ipv6 name-server
- ipv6 nd dad attempts
- ipv6 nd disable-reachable-timer
- ipv6 nd dns-server
- ipv6 nd prefix
- ipv6 neighbor
- ipv6 route
- ipv6 unicast-host-route
- ipv6 unicast-routing
- show cam-ipv6 extended-prefix
- show ipv6 cam linecard
- show ipv6 control-plane icmp
- show ipv6 fib linecard
- show ipv6 flowlabel-zero
- show ipv6 interface
- show ipv6 mld_host
- show ipv6 neighbors
- show ipv6 route
iSCSI Optimization
- advertise dcbx-app-tlv
- iscsi aging time
- iscsi cos
- iscsi enable
- iscsi priority-bits
- iscsi profile-compellant
- iscsi target port
- show iscsi
- show iscsi session
- show iscsi session detailed
- show run iscsi
Layer 2
- MAC Addressing Commands
- Virtual LAN (VLAN) Commands
- Far-End Failure Detection (FEFD)
Link Aggregation Control Protocol (LACP)
- clear lacp counters
- debug lacp
- lacp long-timeout
- lacp port-priority
- lacp system-priority
- port-channel mode
- port-channel-protocol lacp
- show lacp
Link Layer Discovery Protocol (LLDP)
- LLPD Commands
- snmp-notification-interval
- LLDP-MED Commands
Multicast
- IPv4 Multicast Commands
- IPv6 Multicast Commands
Multicast Listener Discovery Protocol
- clear ipv6 mld groups
- debug ipv6 mld
- ipv6 mld explicit-tracking
- ipv6 mld last-member-query-interval
- ipv6 mld query-interval
- ipv6 mld query-max-resp-time
- ipv6 mld version
- show ipv6 mld groups
- show ipv6 mld interface
- MLD Snooping
Multicast Source Discovery Protocol (MSDP)
- clear ip msdp peer
- clear ip msdp sa-cache
- clear ip msdp statistic
- debug ip msdp
- ip msdp cache-rejected-sa
- ip msdp default-peer
- ip msdp log-adjacency-changes
- ip msdp mesh-group
- ip msdp originator-id
- ip msdp peer
- ip msdp redistribute
- ip msdp sa-filter
- ip msdp sa-limit
- ip msdp shutdown
- ip multicast-msdp
- show ip msdp
- show ip msdp sa-cache rejected-sa
Multiple Spanning Tree Protocol (MSTP)
- debug spanning-tree mstp
- disable
- forward-delay
- hello-time
- max-age
- max-hops
- msti
- name
- protocol spanning-tree mstp
- revision
- show config
- show spanning-tree mst configuration
- show spanning-tree msti
- spanning-tree
- spanning-tree msti
- spanning-tree mstp edge-port
- tc-flush-standard
Neighbor Discovery Protocol (NDP)
- debug ipv6 nd ra–guard
- device–role
- hop–limit
- ipv6 nd ra–guard attach–policy
- ipv6 nd ra–guard enable
- ipv6 nd ra–guard policy
- managed-config-flag
- match ra
- mtu
- other–config–flag
- reachable–time
- retrans-time
- router–lifetime
- router–preference maximum
- show config
- show ipv6 nd ra–guard policy
- trusted–port
Object Tracking
- IPv4 Object Tracking Commands
- IPv6 Object Tracking Commands
Open Shortest Path First (OSPFv2 and OSPFv3)
- OSPFv2 Commands
- OSPFv3 Commands
PE Console Commands
- diag
- offline
- online
- power-cycle
- show control-bridge status
- show system
- telnet-peer-stack-unit
- upgrade system
PE Stacking
- renumber
- reset
- show pe system
- show hardware pe
- stack unit
- stack-unit
Per-VLAN Spanning Tree Plus (PVST+)
- description
- disable
- extend system-id
- protocol spanning-tree pvst
- show spanning-tree pvst
- spanning-tree pvst
- spanning-tree pvst err-disable
- tc-flush-standard
- vlan bridge-priority
- vlan forward-delay
- vlan hello-time
- vlan max-age
PIM-Source Specific Mode (PIM-SSM)
- IPv4 PIM Commands
- IPv4 PIM-Source Specific Mode Commands
  - ip pim ssm-range
  - show ip pim ssm-range
PIM-Sparse Mode (PIM-SM)
- IPv4 PIM-Sparse Mode Commands
- IPv6 PIM-Sparse Mode Commands
Policy-based Routing (PBR)
- ip redirect-group
- ip redirect-list
- permit
- redirect
- seq
- show cam pbr
- show ip redirect-list
Port Extenders (PE)
- cascade interface
- clear pe statistics
- connect pe
- feature extended-bridge
- location-led
- pe
- pe provision
- pe-version-compat-support
- reset pe schedule
- reset pe range
- reset pe schedule show
- reset pe unschedule
- show config
- show ecid
- show pe
- show pe csp
- show pe errors
- Dual Homing
  - batch-write-memory
  - commit
  - commit write
  - discard
  - import peer-config
  - show config-mismatch
  - show running-config local
  - show running-config common
  - show config
  - write memory local
- Debugging
  - clear hardware system-flow pe
  - show software pemgr
- Power over Ethernet (PoE)
  - advertise dot3-tlv
  - advertise med power-via-mdi
  - on-disable
  - power budget global-threshold
  - power inline
  - power inline legacy
  - power inline mode
  - power inline restore pe
  - power inline suspend pe
  - upgrade poe-controller
  - show power inline
  - show power detail
  - show revision
Port Monitoring
- description
- erpm
- monitor session
- show config
- show monitor session
- show running-config monitor session
- source (port monitoring)
Private VLAN (PVLAN)
- ip local-proxy-arp
- private-vlan mode
- private-vlan mapping secondary-vlan
- show interfaces private-vlan
- show vlan private-vlan
- switchport mode private-vlan
Quality of Service (QoS)
- Global Configuration Commands
- Per-Port QoS Commands
- Policy-Based QoS Commands
- DSCP Color Map Commands
Rapid Spanning Tree Protocol (RSTP)
- bridge-priority
- debug spanning-tree rstp
- description
- disable
- forward-delay
- hello-time
- max-age
- protocol spanning-tree rstp
- show config
- show spanning-tree rstp
- spanning-tree rstp
- tc-flush-standard
Remote Monitoring (RMON)
- rmon alarm
- rmon collection history
- rmon collection statistics
- rmon event
- rmon hc-alarm
- show rmon
- show rmon alarms
- show rmon events
- show rmon hc-alarm
- show rmon history
- show rmon log
- show rmon statistics
Routing Information Protocol (RIP)
- auto-summary
- clear ip rip
- debug ip rip
- default-information originate
- default-metric
- description
- distance
- distribute-list in
- distribute-list out
- ip poison-reverse
- ip rip receive version
- ip rip send version
- ip split-horizon
- maximum-paths
- neighbor
- network
- offset-list
- output-delay
- passive-interface
- redistribute
- redistribute isis
- redistribute ospf
- router rip
- show config
- show ip rip database
- show running-config rip
- timers basic
- version
Security
- Role-Based Access Control Commands
- AAA Accounting Commands
- Authorization and Privilege Commands
- Authentication and Password Commands
- RADIUS Commands
- TACACS+ Commands
- Port Authentication (802.1X) Commands
- SSH Server and SCP Commands
- Secure DHCP Commands
- ICMP Vulnerabilities
  - drop icmp
- System Security Commands
Service Provider Bridging
- debug protocol-tunnel
- protocol-tunnel
- protocol-tunnel destination-mac
- protocol-tunnel enable
- protocol-tunnel rate-limit
- show protocol-tunnel
sFlow
- sflow collector
- sflow enable (Global)
- sflow enable (Interface)
- sflow ingress-enable
- sflow extended-switch enable
- sflow max-header-size extended
- sflow polling-interval (Global)
- sflow polling-interval (Interface)
- sflow sample-rate (Global)
- sflow sample-rate (Interface)
- show sflow
- show sflow linecard
Simple Network Management Protocol (SNMP) and Syslog
- SNMP Commands
- Syslog Commands
SNMP Traps
Spanning Tree Protocol (STP)
- bpdu-destination-mac-address
- bridge-priority
- debug spanning-tree
- description
- disable
- forward-delay
- hello-time
- max-age
- protocol spanning-tree
- show config
- show spanning-tree 0
- spanning-tree 0
Storm Control
- show storm-control broadcast
- show storm-control multicast
- show storm-control unknown-unicast
- storm-control broadcast (Configuration)
- storm-control broadcast (Interface)
- storm-control multicast (Configuration)
- storm-control multicast (Interface)
- storm-control pfc-llfc
- storm-control unknown-unicast (Configuration)
- storm-control unknown-unicast (Interface)
SupportAssist
- eula-consent
- support-assist
- support-assist activate
- support-assist activity
- SupportAssist Commands
- SupportAssist Activity Commands
- SupportAssist Company Commands
- SupportAssist Person Commands
- SupportAssist Server Commands
- show eula-consent
- show running-config
- show support-assist status
System Time and Date
- clock set
- clock summer-time date
- clock summer-time recurring
- clock timezone
- debug ntp
- ntp authenticate
- ntp authentication-key
- ntp control-key-passwd
- ntp broadcast client
- ntp disable
- ntp master
- ntp offset-threshold
- ntp server
- ntp source
- ntp trusted-key
- show clock
- show ntp associations
- show ntp status
- show ntp vrf associations
Tunneling Commands
- ip unnumbered
- ipv6 unnumbered
- tunnel allow-remote
- tunnel destination
- tunnel dscp
- tunnel flow-label
- tunnel hop-limit
- tunnel keepalive
- tunnel-mode
- tunnel source
Uplink Failure Detection (UFD)
- clear ufd-disable
- debug uplink-state-group
- description
- downstream
- downstream auto-recover
- downstream disable links
- enable
- show running-config uplink-state-group
- show uplink-state-group
- uplink-state-group
- upstream
Virtual Link Trunking (VLT)
- back-up destination
- clear vlt statistics
- delay-restore
- lacp ungroup member-independent
- multicast peer-routing timeout
- peer-link port-channel
- peer-routing
- peer-routing-timeout
- primary-priority
- show vlt brief
- show vlt backup-link
- show vlt counters
- show vlt detail
- show vlt inconsistency
- show vlt mismatch
- show vlt private-vlan
- show vlt role
- show vlt statistics
- system-mac
- unit-id
- vlt domain
- vlt-peer-lag port-channel
- VLT Proxy Gateway
  - peer-domain-link port-channel exclude-vlan
  - proxy-gateway lldp
  - proxy-gateway peer-timeout
  - proxy-gateway static
  - remote-mac-address exclude-vlan
  - show vlt-proxy-gateway
  - vlt-peer-mac transmit
Virtual Router Redundancy Protocol (VRRP)
- IPv4 VRRP Commands
- IPv6 VRRP Commands
Virtual Routing and Forwarding (VRF)
- ip unknown-unicast
- ipv6 unknown-unicast
- description
- ip vrf forwarding
- ip route-export
- ip route-import
- ipv6 route-export
- ipv6 route-import
- match source-protocol
- redistribute
- interface management
- maximum dynamic-routes
- show ip vrf
- show run vrf
VLAN Stacking
- member
- vlan-stack access
- vlan-stack compatible
- vlan-stack dot1p-mapping
- vlan-stack protocol-type
- vlan-stack trunk
X.509v3
- crypto ca-cert delete
- crypto ca-cert install
- crypto cert delete
- crypto cert generate
- crypto cert install
- crypto x509 ocsp
- crypto x509 revocation
- debug crypto
- logging secure
- crypto x509 ca-keyid
- ocsp-server
- ocsp-server prefer
- show crypto ca-cert
- show crypto cert

Version Description

7.6.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

Commands

ip rip receive version — sets the RIP version the interface receives.

ip rip send version — sets the RIP version the interface sends.

1494 Routing Information Protocol (RIP)