Deployment Guide

Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Example
show running-config rip
!
router rip
distribute-list Test1 in
distribute-list Test21 out
network 10.0.0.0
passive-interface TenGigabitEthernet 2/0
neighbor 20.20.20.20
redistribute ospf 999
version 2
timers basic
Manipulate the RIP timers for routing updates, invalid, holddown times, and flush time.
C9000 Series
Syntax
timers basic update invalid holddown flush
To return to the default settings, use the no timers basic command.
Parameters
update Enter the number of seconds to specify the rate at which RIP routing updates are
sent. The range is from zero (0) to 4294967295. The default is 30 seconds.
invalid Enter the number of seconds to specify the time interval before routing updates
are declared invalid or expired. The invalid value should be at least three times the
update timer value. The range is from zero (0) to 4294967295. The default is 180
seconds.
holddown Enter the number of seconds to specify a time interval during which the route is
marked as unreachable but still sending RIP packets. The holddown value should
be at least three times the update timer value. The range is from zero (0) to
4294967295. The default is 180 seconds.
flush Enter the number of seconds to specify the time interval during which the route is
advertised as unreachable. When this interval expires, the route is flushed from the
routing table. The flush value should be greater than the update value. The range is
from zero (0) to 4294967295. The default is 240 seconds.
1492 Routing Information Protocol (RIP)