Deployment Guide

Version Description
7.5.1.0 Introduced on the C-Series.
7.5.1.0 Added support for the DSCP Marking option.
6.1.1.1 Introduced on the E-Series.
Usage
Information
To access this command, enter the class-map command. After the class map is identified, you can
configure the match criteria. For class-map match-any, a maximum of five ACL match criteria are allowed.
For class-map match-all, only one ACL match criteria is allowed.
Related
Commands
class-map — identifies the class map.
match ip dscp
Use a differentiated services code point (DSCP) value as a match criteria.
C9000 Series
Syntax
match {ip | ipv6 | ip-any} dscp dscp-list [set-ip-dscp value | set-color
value]
To remove a DSCP value as a match criteria, use the no match {ip | ipv6 | ip-any} dscp
dscp-list [[multicast] set-ip-dscp value | set-color value] command.
Parameters
ip Enter the keyword ip to support IPv4 traffic.
ipv6 Enter the keyword ipv6 to support IPv6 traffic.
ip-any Enter the keyword ip-any to support IPv4 and IPv6 traffic.
dscp-list Enter the IP DSCP values that is to be the match criteria. Separate values by
commas — no spaces ( 1,2,3 ) or indicate a list of values separated by a hyphen
(1-3). The range is from 0 to 63.
set-ip-dscp value (OPTIONAL) Enter the keywords set-ip-dscp then the IP DSCP value. The
matched traffic is marked with the DSCP value. The range is from 0 to 63.
set-color value (Optional) Enter the keyword set-color followed by a color value. Traffic that fulfills
the match criteria is marked with the color value that you specify. The default value
is yellow.
Defaults none
Command Modes CLASS-MAP CONFIGURATION (config-class-map)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Added the ipv6 and ip-any options on the Z9500.
9.5(0.0) Added the ipv6 and ip-any options on the Z9000, S6000, S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1414 Quality of Service (QoS)