Deployment Guide

show pe errors
Display the port extender error logs.
C9000 Series
Syntax
show pe errors
Default None
Command Modes
● EXEC
● EXEC Privileged
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
In the following example, the Te 1/16 is added as a cascade interface in PE 9, but Te1/16 is connected to
a different PE, which is not provisioned. Hence, the cascade interface is kept in error state.
Example
Dell#show pe errors
PE-id: Not Assigned
PE MAC: f8:b1:56:00:01:04
Interface Errors:
TenGigabitEthernet 1/16 - Error State
Dell#show pe 9
Codes: A - Active, I - Inactive
SVC - Software Version Compatible
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present, PVE - Port Validation Error
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
PE-ID assigned: 9
Status: online
System Mac: f8:b1:56:00:01:28
PE Up Time: 08:36:56
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 1/9(A),Te 1/16(I)
Cascade LAG: Po 267(Up)
----------------------------------------------------------------------
Stack-id Status Reason Type UnitMac No. of Ports
---------------------------------------------------------------------
0 online - C1048P f8:b1:56:00:02:24 52
1 online - C1048P f8:b1:56:00:01:28 52
2 online - C1048P f8:b1:56:00:01:90 52
3 online - C1048P 00:00:ab:00:00:2c 52
1352
Port Extenders (PE)