Deployment Guide

reset Reset selected card
show PE Show running system information
telnet-peer-stack-unit Open a telnet connection to the peer
stack-unit
Example
Dell#telnet-peer-stack-unit
Trying Unit 2...
Connected to Unit 2.
Exit character is '^]'.
Login: admin
Password:
Jun 24 10:14:11: %PE-UNKN-UNIT2-S:CP %SEC-5-LOGIN_SUCCESS: Login
successful for user admin on line vty0 ( Unit 3 )
Dell(standby)>en
Dell(standby)#exit
Session terminated for user admin on line vty 0 ( Unit 3 )
Closed connection.
Dell#Jun 24 10:14:29: %PE-UNKN-UNIT2-S:CP %SEC-5-LOGOUT: Exec session is
terminated for user admin on line vty0 ( Unit 3 )
upgrade system
Upgrade the Dell Networking OS image to the stack-unit.
C9000 Series
Syntax
upgrade system {stack-unit unit number | all } {usbflash: | flash:} {rpmA:|
rpmB:}
Parameters
stack-unit unit
number
Enter the keyword stack-unit and specify the stack-unit ID to sync the image
to that of the stack-unit or enter all to sync the image on all stack-units. The
stack-unit number range is from 0 to 7.
all Enter the keyword all to sync the image on all the stack-units configured.
flash: file-url Enter the keyword flash: and specify the location of the image file in the
format //directory-path or press Enter to launch a prompt sequence.
usbflash: file-url Enter the keyword usbflash: and copy the image from usbflash file
systemusbflash://filepath press Enter to launch a prompt sequence.
rpmA: | rpm B: Specify the flash partition of the operating-system image that you want to
upgrade.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.0) Added support for NFS mount.
9.2(1.0) Introduced on the Z9500.
9.0(0.0) Added support for IPv6 for the file-url parameter.
PE Console Commands 1259