CLI Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage
Information
The following describes the show vrrp brief command.
Item Description
Interface Lists the interface type, slot, and port of the configured VRRP group.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If you configured the track
command to track that interface and you disable the interface, the cost is
subtracted from the priority value assigned to the interface.
Pre States whether preempt is enabled on the interface:
● Y = Preempt is enabled.
● N = Preempt is not enabled.
State Displays the operational state of the interface using one of the following:
● NA/IF (the interface is not available).
● MASTER (the interface associated with the MASTER router).
● BACKUP (the interface associated with the BACKUP router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers associated with the interface.
Example (Brief)
DellEMC> Interface Grp Pri Pre State Master addr Virtual addr(s)
Description--------------------------------------------------
Tf 1/3 1 100 Y Master 200.200.200.200 200.200.200.201
Tf 1/3 2 100 Y Master 200.200.200.200 200.200.200.202 200.200.200.203
Description
Tf 1/3 3 100 Y Master 1.1.1.1 1.1.1.2
Tf 1/3 4 100 Y Master 200.200.200.200 200.200.200.206 200.200.200.207
... short desc
Tf 1/3 254 254 Y Master 200.200.200.200 200.200.200.204 200.200.200.205
DellEMC>
Usage
Information
The following describes the show vrrp command.
1698 Virtual Router Redundancy Protocol (VRRP)