White Papers

Adding and Deleting Users from a Role
To create a user name that is authenticated based on a user role, use the username name password encryption-type
password role role-name command in CONFIGURATION mode.
Example
The following example creates a user name that is authenticated based on a user role.
DellEMC(conf)# username john password 0 password role secadmin
The following example deletes a user role.
NOTE: If you already have a user ID that exists with a privilege level, you can add the user role to username that has a
privilege
DellEMC(conf)# no username john
The following example adds a user, to the secadmin user role.
DellEMC(conf)# username john role secadmin password 0 password
AAA Authentication and Authorization for Roles
This section describes how to configure AAA Authentication and Authorization for Roles.
Configuration Task List for AAA Authentication and Authorization for Roles
This section contains the following AAA Authentication and Authorization for Roles configuration tasks:
● Configuring AAA Authentication for Roles
● Configuring AAA Authorization for Roles
● Configuring TACACS+ and RADIUS VSA Attributes for RBAC
Configure AAA Authentication for Roles
Authentication services verify the user ID and password combination. Users with defined roles and users with privileges are
authenticated with the same mechanism. There are six methods available for authentication: radius, tacacs+, local, enable,
line, and none.
When role-based only AAA authorization is enabled, the enable, line, and none methods are not available. Each of these three
methods allows users to be verified with either a password that is not specific to their user ID or with no password at all.
Because of the lack of security these methods are not available for role only mode. When the system is in role-only mode, users
that have only privilege levels are denied access to the system because they do not have a role. For information about role only
mode, see Configuring Role-based Only AAA Authorization.
NOTE:
Authentication services only validate the user ID and password combination. To determine which commands are
permitted for users, configure authorization. For information about how to configure authorization for roles, see Configure
AAA Authorization for Roles.
To configure AAA authentication, use the aaa authentication command in CONFIGURATION mode.
aaa authentication login {method-list-name | default} method [… method4]
Configure AAA Authorization for Roles
Authorization services determine if the user has permission to use a command in the CLI. Users with only privilege levels can
use commands in privilege-or-role mode (the default) provided their privilege level is the same or greater than the privilege level
of those commands. Users with defined roles can use commands provided their role is permitted to use those commands. Role
inheritance is also used to determine authorization.
696
Security