White Papers

● Enter the IPv6 Address for the device.
EXEC mode or EXEC Privileged mode
telnet ipv6 address
○ ipv6 address: x:x:x:x::x
○ mask: prefix length is from 0 to 128.
NOTE: IPv6 addresses are normally written as eight groups of four hexadecimal digits, where each group is separated
by a colon (:). Omitting zeros is accepted as described in Addressing.
SNMP over IPv6
Dell Networking OS supports the simple network management protocol (SNMP).
You can configure SNMP over IPv6 transport so that an IPv6 host can perform SNMP queries and receive SNMP notifications
from a device running IPv6. The Dell Networking OS SNMP-server commands for IPv6 have been extended to support IPv6. For
more information regarding SNMP commands, refer to the SNMP and SYSLOG chapters in the Dell Networking OS Command
Line Interface Reference Guide.
● snmp-server host
● snmp-server user ipv6
● snmp-server community ipv6
● snmp-server community access-list-name ipv6
● snmp-server group ipv6
● snmp-server group access-list-name ipv6
Showing IPv6 Information
Dell Networking OS supports all of the following show commands.
View specific IPv6 configuration with the following commands.
● List the IPv6 show options.
EXEC mode or EXEC Privileged mode
show ipv6 ?
Dell#show ipv6 ?
accounting IPv6 accounting information
cam IPv6 CAM Entries
fib IPv6 FIB Entries
interface IPv6 interface information
mbgproutes MBGP routing table
mld MLD information
mroute IPv6 multicast-routing table
neighbors IPv6 neighbor information
ospf OSPF information
pim PIM V6 information
prefix-list List IPv6 prefix lists
route IPv6 routing information
rpf RPF table
Dell#
Showing an IPv6 Interface
To view the IPv6 configuration for a specific interface, use the following command.
● Show the currently running configuration for the specified interface.
EXEC mode
show ipv6 interface type {slot/port}
Enter the keyword interface then the type of interface and slot/port information:
394
IPv6 Routing