Setup Guide

the keyword count to display the total number of multicast routes with the
spanned IIF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
9.11.3.0 Introduced on the C9000, S3048–ON, S3100, S4048–ON, S4048T-ON, S6000–
ON, S6010–ON, S6100–ON and Z9100–ON.
Example
Dell# show ipv6 mroute
IP Multicast Routing Table
(*, ff0e:225:0:1::1), uptime 18:01:56
Incoming interface: Null
Outgoing interface list:
Vlan 401
Vlan 1001
(2001:120:3:1::11, ff0e:225:0:1::1), uptime 18:02:03
Incoming interface: Vlan 401
Outgoing interface list:
Vlan 1001
(2001:130:3:1::11, ff0e:225:0:1::1), uptime 18:01:17
Incoming interface: Vlan 1001
Outgoing interface list:
Vlan 401
(2001:140:3:1::11, ff0e:225:0:1::1), uptime 18:01:13
Incoming interface: Vlan 1001
Outgoing interface list:
Vlan 401
Dell#
show ipv6 multicast-cam
Display the content addressable memory (CAM) size and the portions allocated for IP multicast traffic.
Syntax
show ipv6 multicast-cam [linecard slot-id | port-set port-pipe | stack-unit
unit-id]
Parameters
linecard slot-id Enter the keyword linecard with a slot id to select the line card for which to
gather information. The range of slot IDs is from 0 to 2.
port-set port-
pipe
Enter the keyword port-set with a port-pipe number to select the port pipe for
which to gather information. The range of port pipes is from 0 to 3.
stack-unit unit-id Enter the keyword stack-unit with a unit-id number to select the stack unit for
which to gather information.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
9.11.3.0 Introduced on the C9000, S3048–ON, S3100, S4048–ON, S4048T-ON, S6000–
ON, S6010–ON, S6100–ON and Z9100–ON.
922 Multicast