Setup Guide

Column
Heading
Description
● x (not capitalized x) for Dot1x untagged
● X (capitalized X) for Dot1x tagged
● o (not capitalized o) for OpenFlow untagged
● O (capitalized O) for OpenFlow tagged
● H for VSN tagged
● i (not capitalized i) for Internal untagged
● I (capitalized I) for Internal tagged
● v (not capitalized v) for VLT untagged
● V (capitalized V) for VLT tagged
Ports Displays the type, slot, and port information.
● Po = port channel
● Te = ten-gigabit Ethernet
● Fo = forty-gigabit Ethernet
Example
Example (VLAN
ID)
Example (Brief)
DellEMC# show vlan br
VLAN Name STG MAC Aging IP Address
---- ------------------------------------
1 0 1800 unassigned
2 0 1800 2.2.2.2/24
3 0 1800 3.3.3.2/24
DellEMC#
Example (Name)
Example
(OpenFlow
instance)
Related
Commands
● vlan-stack compatible — enable the Stackable VLAN feature on the selected VLAN.
● interface vlan — configure a VLAN.
tagged
Add a Layer 2 interface to a VLAN as a tagged interface.
Syntax
tagged interface
To remove a tagged interface from a VLAN, use the no tagged interface command.
Parameters
interface Enter the following keywords and the interface information:
● For a port channel interface, enter the keywords port-channel then a
number.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults All interfaces in Layer 2 mode are untagged.
Command Modes INTERFACE VLAN
832 Layer 2