Setup Guide

● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
all Display buffer statistics for all ports
queue Enter the keyword queue followed by id for specific queue or keyword all.
priority-group Identifier of the priority group in the range of 0 to 7.
Enter the keyword priority-group followed by {id} for specific priority group
or keyword all.
buffer-info To display total buffer information for the port interface, enter the keywords
buffer-info. To display a queue range, enter 0 to 14 for a specfic queue or
all.
Command Modes
EXEC
EXEC Privilege
Command
History
Version Description
9.8(0.0) Removed the keyword port and added the keywords interface, and the
variable interface . Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
Version 9.3(0.0) Introduced on the S6000 platform.
Usage
Information
The following table describes the fields in the output of the show command:
Field Description
Buffer
Accounting Stats
for Unit 0 Port 1
priority-group 0
Displays the counters that are calculated by the buffer statistics tracking method
for each port per priority group on a particular stack member.
Max Shared Limit Maximum shared buffer space allotted to the specific port for the corresponding
stack unit
Default Packet
Buffer allocate
for the priority-
group
The default packet buffer size in KB that is associated with the particular priority
group
Accounted
Packet Buffer
Shared buffer space that is in use by the packets
Example
DellEMC# show hardware stack-unit 1 buffer unit 0 port 1 priority-group
0 buffer-info
----- Buffer Accounting Stats for Unit 0 Port 1 priority-group 0 -----
Maximum Shared Limit: 0
Default Packet Buffer allocate for the priority-group: 61440
Accounted Packet Buffer: 0
Example
displaying
total-buffer
information for
all interface in
the specified
stack member
and unit
486 Debugging and Diagnostics