Setup Guide

show storm-control pfc status
You can view the status of the PFC storm on a stack unit with specific port set.
Syntax
show storm-control pfc status stack-unit {unit-number} port-set {portpipe-
number}
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage
Information
The show storm-control pfc status command is used to view the status of the PFC storm on
the specified stack unit and the port set.
Example
show storm-control pfc statistics
You can view the statistical details of the PFC storm on a stack unit with specified port set.
Syntax
show storm-control pfc statistics stack-unit {unit-number} port-set
{portpipe-number
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage
Information
The show storm-control pfc statistics command is used to view the statistical data of the
PFC storm on the specified stack unit and the port set.
Example
show storm-control unknown-unicast
Display the storm control unknown-unicast configuration.
Syntax
show storm-control unknown-unicast [interface]
1448 Storm Control