Service Manual

294 ospf 5468160 503808 724204 662560 78208 61644
288 dsm 6778880 1159168 39490 16564 39490 22926
287 rtm 5713920 602112 442280 198768 376024 243512
284 rip 4562944 258048 528 0 528 528
281 lacp 4673536 266240 221060 0 221060 221060
277 ipm1 4837376 380928 83788 0 83788 83788
273 acl 5005312 512000 239564 149076 123616 90488
272 topoDPC 117927936 0 0 0 0 0
271 bcmNHOP 117927936 0 0 0 0 0
270 bcmDISC 117927936 0 0 0 0 0
269 bcmATP-RX 117927936 0 0 0 0 0
268 bcmATP-TX 117927936 0 0 0 0 0
267 bcmSTACK 117927936 0 0 0 0 0
266 bcmRX 117927936 0 0 0 0 0
265 bcmLINK.0 117927936 0 0 0 0 0
!----------- output truncated --------------!
DellEMC#
show reload-type
Shows the reload type which occurs on the next reboot.
Syntax
show reload-type
Parameters N/A
Defaults normal-reload
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Updated to include warmboot support.
8.3.11.4 Introduced on all Dell EMC Networking OS platforms.
Example
DellEMC#show reload-type
Reload-Type : warmboot [Next boot : warmboot]
Current ISSU Version 1.0
Next boot from System A
Next ISSU Version 1.0
DellEMC#
show reset-reason
Display the reason for the last system reboot.
Syntax
show reset-reason [stack-unit {stack-unit-number | all}]
Parameters
stack-unit unit-
number
(OPTIONAL) Enter the keyword stack-unit and the stack unit number to view the
reason for the last system reboot for that stack unit.
all (OPTIONAL) Enter the keyword stack-unit and the keyword all to view the
reason for the last system reboot of all stack units in the stack.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
140 Control and Monitoring