Release Notes

Current system image information in the system:
=======================================================
Type Boot Type A B
-------------------------------------------------------
stack-unit 1 FLASH BOOT 9.14(2.10) 9.14(2.9) [boot]
stack-unit 2 FLASH BOOT 9.14(2.10) 9.14(2.9) [boot]
stack-unit 3 FLASH BOOT 9.14(2.10) 9.14(2.9) [boot]
stack-unit 4 is not present.
stack-unit 5 is not present.
stack-unit 6 is not present.
stack-unit 7 is not present.
stack-unit 8 is not present.
stack-unit 9 is not present.
stack-unit 10 is not present.
stack-unit 11 is not present.
stack-unit 12 is not present.
DellEMC#
6. Change the primary boot parameter to the upgraded partition (A: or B:).
CONFIGURATION mode
boot system stack-unit {1-12 | all} {default | primary | secondary} {flash://file-name |
ftp://file-url | system: {A: | B:} | tftp://file-url }
DellEMC(conf)#boot system stack-unit all primary system: a:
DellEMC(conf)#
7. Save the upgrade configuration so that it is retained after a reload.
EXEC Privilege mode
write memory
DellEMC#write memory
!!!
May 10 17:01:33: %STKUNIT2-M:CP %FILEMGR-5-FILESAVED: Copied running-config to
startup-config in flash by default
..Synchronizing data to peer stack-unit
!!!!!!!!!!!!!!!!!!
DellEMC#
8. Reload the switch so that the Dell EMC Networking OS image is retrieved from flash.
EXEC Privilege mode
reload
DellEMC#reload
Proceed with reload [confirm yes/no]: yes...
9. Verify that the switch is upgraded to the latest Dell EMC Networking OS version.
EXEC Privilege mode
show version
DellEMC#show version
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9.14(2.10)
Copyright (c) 2000-2021 by Dell Inc. All Rights Reserved.
Build Time: Tue May 18 11:34:10 2021
Build Path: /build/build01/SW/SRC
Dell EMC Networking OS uptime is 1 hour(s), 31 minute(s)
System image file is "system://A"
System Type: S3124P
Control Processor: Broadcom 56340 (ver A0) with 2 Gbytes (2147483648 bytes) of
memory, core(s) 1.
9