Release Notes

Upgrade result :

================

Unit 3 System fpga upgrade in progress.

It will take a few minutes for the upgrade to complete.

Unit 3 will auto reboot once the the upgrade is complete.

Please do NOT power off or reload the unit!!!

DellEMC#

Upgrading the PoE Controller

Upgrade the PoE controller image on a stack unit of the S3100 series switch.

1. Upgrade the PoE controller image on a specified stack unit.

EXEC Privilege mode

upgrade poe-controller stack-unit unit-number

DellEMC#upgrade poe-controller stack-unit 1

Current PoE-Controller information in the system:

=======================================================

Stack Unit Current Version New Version

-------------------------------------------------------

1 2.65 2.65

***********************************************************************

* Warning - Upgrading PoE Controller should only be attempted *

* when necessary. Stack-unit will be reset automatically after *

* upgrade. PoE to all ports of the unit would be suspended until *

* upgrade completes and unit gets reloaded successfully. Please do not*

* Reset/Powercyle or Reload. Proceed with caution ! *

***********************************************************************

Upgrade PoE Controller Firmware for stack-unit 1 ? [yes/no]: yes

PoE Controller upgrade in progress. Please do NOT POWER-OFF the card.

Upgrade result :

================

Slot 1 PoE Controller FirmWare upgrade successful. Resetting the stack-unit.

DellEMC#

Support Resources

The following support resources are available for the S3100 Series.

Documentation Resources

For information about using the S3100 Series, see the following documents at http://www.dell.com/support:

● Dell EMC Networking S3100 Series Installation Guide

● Quick Start Guide

● Dell EMC Command Line Reference Guide for the S3100 Series

● Dell EMC Configuration Guide for the S3100 Series

For more information about hardware features and capabilities, see the Dell EMC Networking website at https://