Deployment Guide

* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
O3 - OSPFv3
R - Static Route (RTM)
M - MPLS
V - VRRP
VT - Vxlan Tunnel
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult Clients
* 5.1.1.1 5.1.1.2 Po 30 Up 200 200 3 O
* 6.1.1.1 6.1.1.2 Vl 30 Up 200 200 3 O
* 7.1.1.1 7.1.1.2 Te 1/21/1 Up 200 200 3 O
* 11::1 11::2 Te 1/1 Up 200 200 3 R
* 21::1 21::2 Vl 100 Up 200 200 3 R
* 31::1 31::2 Vl 101 Up 200 200 3 R
The following example shows the show bfd vrf neighbors command output showing the
nondefault VRF.
DellEMC(conf)#do sho bfd vrf vrf2 neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
O3 - OSPFv3
R - Static Route (RTM)
M - MPLS
V - VRRP
VT - Vxlan Tunnel
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult
VRF Clients
* 13::1 13::2 Te 1/1/1 Up 200 200 3 2
R
* 23::1 23::2 Vl 300 Up 200 200 3 2
R
* 33::1 33::2 Vl 301 Up 200 200 3 2
R
* 13.1.1.1 13.1.1.2 Te 1/1/ Up 200 200 3 2
R
* 23.1.1.1 23.1.1.2 Vl 300 Up 200 200 3 2
R
* 33.1.1.1 33.1.1.2 Vl 301 Up 200 200 3 2
R
Example (Detail)
The following example shows the show bfd vrf neighbors detail command output showing the
nondefault VRF called “VRF_blue”.
show bfd vrf VRF_blue neighbors detail
Session Discriminator: 5
Neighbor Discriminator: 3
Local Addr: 5.1.1.1
Local MAC Addr: 00:a0:c9:00:00:02
Remote Addr: 5.1.1.2
Remote MAC Addr: 34:17:98:34:00:12
Int: Port-channel 30
Bidirectional Forwarding Detection (BFD) 325