Deployment Guide

Session: discriminator mine: 1 yours: 1, state: 0, ifindex : 0x4c00d400,
vrf : 0
Src IP: [106.0.0.1]
Dest IP: [106.0.0.2]
UpTime: 2019-05-10 08:59:31.445
DnTime: 2019-05-10 08:59:49.486
Session: discriminator mine: 2 yours: 2, state: 0, ifindex : 0x4c011c00,
vrf : 0
Src IP: [142.0.0.1]
Dest IP: [142.0.0.2]
UpTime: 2019-05-10 08:59:31.448
DnTime: 2019-05-10 08:59:49.496
Session: discriminator mine: 3 yours: 3, state: 0, ifindex : 0x4c00da00,
vrf : 0
Src IP: [109.0.0.1]
Dest IP: [109.0.0.2]
UpTime: 2019-05-10 08:59:32.945
DnTime: 2019-05-10 08:59:49.498
remote-exec cp p bfdm call bfdmPrintNbrDnSess
Displays the saved BFD down sessions for a specific BFD neighbor.
Syntax
remote-exec cp p bfdm call bfdmPrintNbrDnSess("neighbor-ip-address")
Parameters
neighbor-ip-
address
Enter the IP address of the BFD neighbor for which you want to see the down
sessions.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(1.5) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6010–ON, and Z9100–
ON.
Usage
Information
Although the Dell EMC Networking OS help does not display this command under the EXEC mode, the
command works if you manually type it in the CLI prompt.
Provide the BFD neighbor address within the quotes to get the BFD down sessions for that BFD neighbor.
Example
Dell#remote-exec cp p bfdm call bfdmPrintNbrDnSess("122.0.0.2")
May 10 09:09:21 %STKUNIT0-M:CP %CLI-0-REMOTE-EXEC: RCMD: remote-exec CP
bfdm call bfdmPrintNbrDnSess("122.0.0.2")
call bfdmPrintNbrDnSess("122.0.0.2")
Session: discriminator mine: 75 yours: 75, state: 0, ifindex :
0x4c00f400, vrf : 0
Src IP: [122.0.0.1]
Dest IP: [122.0.0.2]
UpTime: 2019-05-10 08:59:44.269
DnTime: 2019-05-10 08:59:49.738
value = 34 = 0x22
show bfd neighbors
Display BFD neighbor information on all interfaces or a specified interface.
Syntax
show bfd [vrf vrf name] neighbors [interface] [detail]
Bidirectional Forwarding Detection (BFD) 323