Deployment Guide

Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage
Information
You must configure VXLAN globally before using VXLAN-instance. Use the no shutdown command to
enable the VXLAN instance.
Example
Enable VXLAN instance:
DellEMC(conf)#int 1/5/1
DellEMC(conf-if-te-1/5/1)#vxlan-instance 1
DellEMC(conf-if-te-1/5/1-vxlan-inst-1)#no shutdown
Disable VXLAN instance:
DellEMC(conf)#no vxlan-instance 1
Related
Commands
feature vxlan — Enable VXLAN configuration globally on the platform.
vxlan-instance (VAP)
To configure a VXLAN-Access Port (VAP) in to VXLAN-instance
Syntax
vxlan-instance instance ID
To unconfigure VAP, use the no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Defaults Disabled
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.4(0.0) Introduced on the S6000.
Usage
Information
You must disable vxlan-instance before unconfiguring VAP.
Related
Commands
feature vxlan — Enable VXLAN configuration globally on the platform.
1672 Virtual Extensible LAN (VXLAN)