Connectivity Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

971

972

973

974

975

976

977

978

979

980

Table Of Contents

Commands

● show track – display information about tracked objects, including configuration, current state, and

clients which track the object.

● threshold metric – configure the metric threshold used to determine the UP and/or DOWN state of a

tracked route.

● track resolution ip route – configure the protocol-specific resolution value used to scale an IPv4 route

metric.

track ip host reachability

Configure object tracking on the reachability of an IPv4 host.

Syntax

track object-id ip host host-ip-address/prefix-len reachability [vrf vrf-

name]

To return to the default setting, use the no track object-id command.

Parameters

object-id

Enter the ID number of the tracked object. The range is 1 to 500.

ip-address/

prefix-len

Enter an IPv4 address in dotted decimal format. The valid IPv4 prefix lengths are

from /0 to /32.

vrf

vrf-name

(Optional) You can configure a VPN routing and forwarding (VRF) instance to

specify the virtual routing table to which the tracked route belongs.

Defaults None

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4820T, S4810, S6000, S5000, Z9000, Z9500, IOA, and MXL.

track ip route reachability

Configure object tracking on the reachability of an IPv4 route.