Connectivity Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Example
Example (Object-
id)
DellEMC# show running-config track 300
track 300 ip route 10.0.0.0/8 metric threshold
delay down 3
delay up 5
threshold metric up 100
Related
Commands
● show track – display information about tracked objects, including configuration, current state, and
clients which track the object.
● track interface ip routing – configure object tracking on the routing status of an IPv4 Layer 3
interface.
● track interface line-protocol – configure object tracking on the line-protocol state of a Layer 2
interface.
● track ip route metric threshold – configure object tracking on the threshold of an IPv4 route metric.
● track ip route reachability – configure object tracking on the reachability of an IPv4 route.
show track
Display information about tracked objects, including configuration, current tracked state (UP or DOWN), and the clients which
are tracking an object.
Syntax
show track [object-id [brief] | interface [brief] [vrf vrf-name] | ip route
[brief] [vrf vrf-name] | resolution | vrf vrf-name [brief] | brief]
Parameters
object-id (OPTIONAL) Display information on the specified tracked object. The range is 1 to
500.
interface (OPTIONAL) Display information on all tracked interfaces (Layer 2 and IPv4 Layer
3).
ip route (OPTIONAL) Display information on all tracked IPv4 routes.
resolution (OPTIONAL) Display information on the configured resolution values used to scale
protocol-specific route metrics. The range is 0 to 255.
brief (OPTIONAL) Display a single line summary of the tracking information for a
specified object, object type, or all tracked objects.
vrf vrf-name (OPTIONAL) E-Series only: Display information on only the tracked objects that are
members of the specified VRF instance. The maximum is 32 characters. If you do
not enter a VRF name, information on the tracked objects from all VRFs displays.
Command Modes EXEC Privilege
968 Object Tracking