White Papers

Unsuccessful login attempt(s) since the last successful login: 0
Unsuccessful login attempt(s) in last 30 day(s): 0
Successful login attempt(s) in last 30 day(s): 1
------------------------------------------------------------------
The following is sample output of the show login statistics unsuccessful-attempts
command.
Dell#show login statistics unsuccessful-attempts
There were 3 unsuccessful login attempt(s) for user admin in last 30
day(s).
The following is sample output of the show login statistics unsuccessful-attempts
time-period days command.
Dell# show login statistics unsuccessful-attempts time-period 15
There were 0 unsuccessful login attempt(s) for user admin in last 15
day(s).
The following is sample output of the show login statistics unsuccessful-attempts user
login-id command.
Dell# show login statistics unsuccessful-attempts user admin
There were 3 unsuccessful login attempt(s) for user admin in last 12
day(s).
The following is sample output of the show login statistics successful-attempts
command.
Dell#show login statistics successful-attempts
There were 4 successful login attempt(s) for user admin in last 30
day(s).
Related
Commands
login statistics — Enable and configure user login statistics on console and virtual terminal lines.
login concurrent-session — Configures the limit of concurrent sessions for each user on console and
virtual terminal lines.
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface |
stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the slot/port
information to display interface control block information for that interface:
● For a Port Channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
● For a 10G Ethernet interface, enter the keyword TenGigabitEthernet.
stack-unit unit-
ID
Enter the keywords stack-unit then the stack member number to display IFM
information for that unit. The range is from 0 to 5.
trace-flags Enter the keyword trace-flags to display IFM information for internal trace
flags.
98 Control and Monitoring