White Papers

Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the S6000-ON.
Version 9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage
Information
If the specified color-map does not exist, the Diffserv Manager (DSM) creates a color map and sets all
the DSCP values to green (low drop precedence).
Example
The following example assigns the color map, bat-enclave-map, to interface.
Related
Commands
dscp — sets the number of specific DSCP values for color map profile to yellow or red.
qos dscp-color-map — configures the DSCP color map.
show qos dscp-color-policy
Display DSCP color policy configuration for one or all interfaces.
Syntax show qos dscp-color-policy {summary [interface] | detail {interface}}
Parameters
summary Enter the summary keyword to display summary information about a color policy
on one or more interfaces.
Detail Enter the detail keyword to display detailed information about a color policy on
one or more interfaces.
interface Enter the name of the interface that has color policy configured.
Defaults None
Command Modes EXEC
Supported Modes Full-Switch
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the S6000-ON.
9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Example
Related
Commands
show qos dscp-color-map — displays DSCP color maps
show qos dscp-color-map
Display the DSCP color map for one or all interfaces.
Syntax
show qos dscp-color-map map-name
Parameters
map-name Enter the name of the color map.
Defaults None
Command Modes EXEC
Quality of Service (QoS) 971