Manualshelf

White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9
951952953954955956957958959960
Table Of Contents
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
When you apply rate-shape in QoS policy both on the Queue Level and in Aggregate mode, the
queue-based shaping occurs first then aggregate rate shaping.
service-policy input
Apply an input policy map to the selected interface.
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input policy-
map-name [layer2] command.
Parameters
policy-map-name
Enter the name for the policy map in character format (16 characters maximum).
You can identify an existing policy map or name one that does not yet exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The
default is Layer 3.
Defaults Layer 3
Command Modes INTERFACE
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
You can attach a single policy-map to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
NOTE: The service-policy commands are not allowed on a port channel. The service-
policy input policy-map-name command and the service-class dynamic dot1p
command are not allowed simultaneously on an interface.
Related
Commands
policy-map-input — creates an input policy map.
service-policy output
Apply an output policy map to the selected interface.
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output
policy-map-name command.
Parameters
policy-map-name
Enter the name for the policy map in character format (16 characters maximum).
You can identify an existing policy map or name one that does not yet exist.
Defaults none
Command Modes INTERFACE
Quality of Service (QoS) 957