White Papers

show monitor session
Display the monitor information of a particular session or all sessions.
Syntax
show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor session command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range is from 0 to 65535.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Example
Dell#show monitor session 5
SessionID Source Destination Direction Mode Type
--------- ------ ----------- --------- ---- ----
5 Te 0/4 Te 0/3 rx interface Port-based
Dell#
Related
Commands
monitor session — creates a session for monitoring.
show running-config monitor session
Displays the running configuration of all monitor sessions or a specific session.
Syntax
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use the show running-config
monitor session command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range is from 0 to 65535.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Usage
Information
The monitoring command is saved in the running configuration at the Monitor Session mode level and
can be restored after a chassis reload.
Example
Dell#show run monitor session
!
monitor session 5
source TenGigabitEthernet 0/4 destination TenGigabitEthernet 0/5
direction rx
!
920 Port Monitoring