White Papers

Interface table : 992 bytes
Neighbor table : 528 bytes
RP Mapping : 0 bytes
show ip pim tib
View the PIM tree information base (TIB).
Syntax
show ip pim tib [group-address [source-address]]
Parameters
group-address (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D).
source-address (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D).
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full—Swtich
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ip pim tib command shown in the following example.
Field Description
(S, G) Displays the entry in the multicast PIM database.
uptime Displays the amount of time the entry has been in the PIM route table.
expires Displays the amount of time until the entry expires and is removed from the
database.
RP Displays the IP address of the RP/source for this entry.
flags List the flags to define the entries:
● D = PIM Dense Mode
● S = PIM Sparse Mode
● C = directly connected
● L = local to the multicast group
● P = route was pruned
● R = the forwarding entry is pointing toward the RP
● F = Dell Networking OS is registering this entry for a multicast source
● T = packets were received via Shortest Tree Path
● J = first packet from the last hop router is received and the entry is ready to
switch to SPT
● K = acknowledge pending state
Incoming
interface
Displays the reverse path forwarding (RPF) interface towards the RP/ source.
RPF neighbor Displays the next hop from this interface towards the RP/source.
Outgoing
interface list:
Lists the interfaces that meet one of the following criteria:
● a directly connect member of the Group
● statically configured member of the Group
● received a (*,G) Join message
Example
Dell#show ip pim tib
PIM Multicast Routing Table
906 PIM-Sparse Mode (PIM-SM)