White Papers

Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ip pim interface command shown in the following example.
Field Description
Address Lists the IP addresses of the interfaces participating in PIM.
Interface List the interface type, with either slot/port information or ID (VLAN or Port
Channel), of the interfaces participating in PIM.
Ver/Mode Displays the PIM version number and mode for each interface participating in PIM:
● v2 = PIM version 2
● S = PIM Sparse mode
Nbr Count Displays the number of PIM neighbors discovered over this interface.
Query Intvl Displays the query interval for Router Query messages on that interface
(configured with ip pim query-interval command).
DR Prio Displays the Designated Router priority value configured on the interface (use the
ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
Example
E600-7-RPM0#show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
172.21.200.254 te 0/5 v2/S 0 30 1 172.21.200.254
172.60.1.2 te 0/1 v2/S 0 30 1 172.60.1.2
192.3.1.1 te 1/8 v2/S 1 30 1 192.3.1.1
192.4.1.1 te 1/8 v2/S 0 30 1 192.4.1.1
172.21.110.1 te 1/6 v2/S 0 30 1 172.21.110.1
172.21.203.1 te 1/7 v2/S 0 30 1 172.21.203.1
show ip pim neighbor
View PIM neighbors.
Syntax
show ip pim neighbor
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full—Swtich
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ip pim neighbor command shown in the following example.
Field Description
Neighbor address Displays the IP address of the PIM neighbor.
Interface List the interface type, with either slot/port information or ID (VLAN or Port
Channel), on which the PIM neighbor was found.
900 PIM-Sparse Mode (PIM-SM)