White Papers

Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The host name is used in the prompt.
Related
Commands
feature unique-name
http-server
Disable / Enable the Blade I/O Manager Software.
Syntax
http-server blademgr
Parameters
blademgr Enter the keyword blademgr and specify the port for HTTP.
Defaults ENABLED
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0 ) Introduced on the Stomp IOA and MXL-IOA
Usage
Information
By default, the Blade I/O Manager is enabled and there is no entry in the running configuration. Using the
command no http-server blademgr, disables the Blade I/O Manager and also a “no http-server”
entry is made in the running configuration. To re-enable the Blade I/O Manager, use the command
http-server blademgr which enables the feature and also removes the entry from the running
configuration. On reload, if the system detects a “no http-server” entry in the start-config, the feature
will be disabled.
NOTE: Please ensure to save and reload the configuration for the changes to take effect.
ip ftp password
Specify a password for outgoing FTP connections.
Syntax
ip ftp password [encryption-type] password
Parameters
encryption-type (OPTIONAL) Enter one of the following numbers:
● 0 (zero) for an unecrypted (clear text) password
● 7 (seven) for a hidden text password
password Enter a string up to 40 characters as the password.
Defaults Not configured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
90 Control and Monitoring