White Papers

To disable PIM debugging, use the no debug ip pim command or use the undebug all to disable
all the debugging commands.
Parameters
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword group to view PIM messages for a specific group.
group (OPTIONAL) Enter the keyword group to view PIM messages for a specific group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one of the
optional parameters:
● in: to view incoming packets
● out: to view outgoing packets
register (OPTIONAL) Enter the keyword register to view PIM register address in dotted
decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state changes.
timer [assert |
hello | joinprune |
register]
(OPTIONAL) Enter the keyword timer to view PIM timers. Enter one of the
optional parameters:
● assert: to view the assertion timer
● hello: to view the PIM neighbor keepalive timer
● joinprune: to view the expiry timer (join/prune timer)
● register: to view the register suppression timer
Defaults Disabled.
Command Modes EXEC Privilege
Supported Modes Full—Swtich
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
ip pim bsr-border
Define the border of PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
Syntax
ip pim bsr-border
To return to the default value, use the no ip pim bsr-border command.
Defaults Disabled.
Command Modes INTERFACE
Supported Modes Full—Swtich
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are cleaned up by
time-out. To clean the candidate RP advertisements, use the clear ip pim rp-mapping command.
892 PIM-Sparse Mode (PIM-SM)