White Papers

Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
After you enable FTP server functions with the ftp-server enable command, Dell Networking
recommends specifying a top-level directory path. Without a top-level directory path specified, the Dell
Networking OS directs users to the flash directory when logging in to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the M I/O Aggregator.
ftp-server username— sets a username and password for incoming FTP connections to the M I/O
Aggregator.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type] password
Parameters
username Enter a text string up to 40 characters long as the user name.
password
password
Enter the keyword password then a string up to 40 characters long as the
password. Without specifying an encryption type, the password is unencrypted.
encryption-type (OPTIONAL) After the keyword password, enter one of the following numbers:
● 0 (zero) for an unecrypted (clear text) password
● 7 (seven) for a hidden text password
Defaults Not enabled.
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
hostname
Set the host name of the system.
Syntax
hostname name
Parameters
name Enter a text string, up to 32 characters long.
Defaults Dell Networking Operating System (OS)
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
Control and Monitoring 89