White Papers

show cam pbr
Displaysthe PBR CAM content.
Syntax
show cam pbr {[interface interface] | stack—unit slot-number port-set
number]} [summary]
Parameters
interface
interface
Enter the keyword interface then the name of the interface.
stack–unit
number
Enter the keyword stack-unit then the slot number. The range is from 0 to 11 .
port-set number Enter the keywords port-set then the port-pipe number. The range is from 0 to
0.
summary Enter the keyword summary to view only the total number of CAM entries.
Defaults none
Command Modes EXEC
Supported Modes Full—Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Added support for removing the Sonet interface on the MXL 10/40GbE Switch IO
Module.
7.4.1.0 Introduced.
Usage
Information
The show cam pbr command displays the PBR CAM content.
Example
Dell#show cam pbr stack-unit 0 po 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,
Bit 1 - SYN, Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp Next-hop Egress
Flag Port Port
MAC Port
------------------------------------------------------------
00000 5 N/A IP 0x0 0 0 22.22.2.22/32 33.33.3.0/24
0:01:e8:8a:fd:76 0/0
00001 5 N/A 145 0x0 0 0 0.0.0.0/0 44.4.4.4/32
00:01:e8:8a:fd:76 Vl 100(0/1)
00002 5 N/A TCP 0x0 0 0 55.1.3.0/24 66.6.6.6/32
00:01:e8:8a:fd:76 Po 128
00003 5 N/A UDP 0x0 0 0 55.1.3.0/24 66.6.6.6/32
00:01:e8:8a:fd:76 Po 128
00004 5 N/A IP 0x0 0 0 0.0.0.0/0 0.0.0.0/0
00:01:e8:8a:fd:76 Vl 1020(Po 100)
Dell#
Related
Commands
● ip redirect-group – applies a redirect group to an interface.
● show ip redirect-list – displays the redirect-list configuration.
● show cam-usage – displays the CAM usage on ACL, router, or switch.
show ip redirect-list
View the redirect list configuration and the interfaces it is applied to.
Syntax
show ip redirect-list redirect-list-name
Parameters
redirect-list-
name
Enter the name of a configured Redirect list.
Command Modes
● EXEC
888 Policy-based Routing (PBR)