White Papers

To disable redistribution, use the no redistribute {connected | static} command.
Parameters
bgp as number
Enter the keyword bgp then the autonomous system number.
The range is from 1 to 65535.
connected
Enter the keyword connected to redistribute routes from physically connected
interfaces.
static
Enter the keyword static to redistribute manually configured routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then the OSPFv3 link state type
of 1 or 2 for default routes. The values are:
● 1 for a type 1 external route
● 2 for a type 2 external route
The default is 2.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map. If the route map is not configured, the default is deny (to drop all
routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Defaults Not configured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Added support for OSPFv3.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To redistribute the default route (x:x:x:x::x), use the default-information originate command.
Related
Commands
default-information originate — generates a default route into the OSPF routing domain.
router-id
Designate a fixed router ID.
Syntax
router-id ip-address
To return to the previous router ID, use the no router-id ip-address command.
876 Open Shortest Path First (OSPFv2 and OSPFv3)