White Papers

Example
Dell#show running-config ospf
!
ipv6 router ospf 10
log-adjacency-changes
auto-cost reference-bandwidth 2000
Dell(conf-ipv6-router_ospf)#auto-cost reference-bandwidth ?
<1-4294967> Reference bandwidth in Mbits/second (default =
100)
Dell(conf-ipv6-router_ospf)#no auto-cost ?
reference-bandwidth Use reference bandwidth method to assign OSPF
cost
<cr>
Dell(conf-ipv6-router_ospf)#
clear ipv6 ospf process
Reset an OSPFv3 router process without removing or re-configuring the process.
Syntax
clear ipv6 ospf process
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full—Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ipv6 ospf
Display debug information and interface types on OSPF IPv6 packets or events.
Syntax
debug ipv6 ospf {packet | events} [interface]
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a Port Channel interface, enter the keyword port-channel then a
number. The range is 1 to 128.
● For a tunnel interface, enter the keyword tunnel then a number. The range is
1 to 16383.
● For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Command Modes EXEC Privilege
Supported Modes Full—Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
862 Open Shortest Path First (OSPFv2 and OSPFv3)