White Papers

OSPF Router with ID (1.1.1.10) (Process ID 100)
Summary Network (Area 0.0.0.0)
LS age: 1551
Options: (No TOS-capability, DC, E)
LS type: Summary Network
Link State ID: 192.68.16.0
Advertising Router: 192.168.17.1
LS Seq Number: 0x80000054
Checksum: 0xb5a2
Length: 28
Network Mask: /24
TOS: 0 Metric: 1
LS age: 9
Options: (No TOS-capability, No DC, E)
LS type: Summary Network
Link State ID: 192.68.32.0
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000016
Checksum: 0x987c
Length: 28
Network Mask: /24
TOS: 0 Metric: 1
LS age: 7
Options: (No TOS-capability, No DC, E)
LS type: Summary Network
Link State ID: 192.68.33.0
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000016
Checksum: 0x1241
Length: 28
Network Mask: /26
TOS: 0 Metric: 1
#
Related
Commands
show ip ospf database — displays OSPF database information.
show ip ospf interface
Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no output is generated.
Syntax
show ip ospf process-id interface [interface]
Parameters
process-id Enter the OSPF process ID to show a specific process. If you do not enter a
process ID, the command applies only to the first OSPF process.
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
● For the null interface, enter the keyword null then zero (0).
● For Loopback interfaces, enter the keyword loopback then a number from 0
to 16383.
● For Port Channel groups, enter the keywords port-channel then a number.
The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a VLAN, enter the keyword vlan then the VLAN ID. The range is from 1 to
4094.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Open Shortest Path First (OSPFv2 and OSPFv3) 849