White Papers

Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no Process ID is entered,
all OSPF processes are cleared.
process (OPTIONAL) Enter the keyword process to reset the OSPF process.
Command Modes EXEC Privilege
Supported Modes Full—Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
clear ip ospf statistics
Clear the packet statistics in interfaces and neighbors.
Syntax
clear ip ospf process-id statistics [interface name {neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no Process ID is entered,
all OSPF processes are cleared.
interface name (OPTIONAL) Enter the keyword interface then one of the following interface
keywords and slot/port or number information:
● For Port Channel groups, enter the keywords port-channel then a number.
The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a VLAN, enter the keyword vlan then a number from 1 to 4094.
neighbor router-
id
(OPTIONAL) Enter the keyword neighbor then the neighbor’s router-id in dotted
decimal format (A.B.C.D.).
Defaults none
Command Modes EXEC Privilege
Supported Modes Full—Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show ip ospf statistics — displays the OSPF statistics.
debug ip ospf
Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging for the first OSPF
process.
Syntax
debug ip ospf process-id [bfd |event | packet | spf | database-timer rate-
limit]
To cancel the debug command, use the no debug ip ospf command.
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no Process ID is entered,
all OSPF processes are cleared.
816 Open Shortest Path First (OSPFv2 and OSPFv3)