White Papers

Usage
Information
This command clears alarms that are no longer active. If an alarm situation is still active, it is seen in the
system output.
clear command history
Clear the command history log.
Syntax
clear command history
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
show command-history— displays a buffered log of all the commands all users enter along with a time
stamp.
clear line
Reset a terminal line.
Syntax
clear line {line-number | console 0 | vty number}
Parameters
line-number Enter a number for one of the 12 terminal lines on the system. The range is from 0
to 11.
console 0 Enter the keywords console 0 to reset the console port.
vty number Enter the keyword vty then a number to clear a terminal line. The range is from 0
to 9.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
configure
Enter CONFIGURATION mode from EXEC Privilege mode.
Syntax
configure [terminal]
Parameters
terminal (OPTIONAL) Enter the keyword terminal to specify that you are configuring
from the terminal.
Command Modes EXEC Privilege
Supported Modes All Modes
Control and Monitoring 81