White Papers

show fcoe-map
Displays the Fibre Channel and FCoE configuration parameters in FCoE maps.
Syntax
show fcoe-map [brief | map-name]
Parameters
brief Displays an overview of currently configured FCoE maps.
map-name Displays the FC and FCoE configuration parameters in a specified FCoE map. The
FCoE map is applied on Ethernet (FCoE) and FC ports to transmit FC storage
traffic to a specified fabric.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Supported on the FN2210S Aggregator.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex
IO module.
Usage
Information
Use the show fcoe-map command to display the FC and FCoE parameters used to configure server-
facing Ethernet (FCoE) and fabric-facing FC ports in all FCoE maps on an FN 2210S Aggregator with the
FC Flex IO module NPIV proxy gateway.
In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN fabric to which FC
storage traffic is sent, and the FCoE VLAN to be used must be unique.
The following describes the show fcoe-map brief output shown in the example.
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC traffic is forwarded.
VLAN ID The dedicated FCoE VLAN used to transport FCoE storage traffic between servers
and a fabric over the NPIV proxy gateway. The configured VLAN ID must be the
same as the fabric ID.
FC-MAP FCoE MAC address-prefix value - The unique 24-bit MAC address prefix that
identifies a fabric.
FCF Priority The priority used by a server to select an upstream FCoE forwarder.
Config-State Indicates whether the configured FCoE and FC parameters in the FCoE map are
valid: Active (all mandatory FCoE and FC parameters are correctly configured)
or Incomplete (either the FC-MAP value, fabric ID, or VLAN ID are not correctly
configured).
Oper-State Operational status of link to the fabric: Up (link is up and transmitting FC traffic),
Down (link is down and not transmitting FC traffic), Link-wait (link is up and
waiting for FLOGI to complete on peer FC port), or Removed (port has been shut
down).
The following describes the show fcoe-map map-name output shown in the example.
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC traffic is forwarded.
804 NPIV Proxy Gateway