White Papers

● Keepalive: enable
● Vlan priority: 3
Command Modes CONFIGURATION
INTERFACE
Supported Modes Programmable-Mux (PMUX)
Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Supported on the FN2210S Aggregator with the PMUX module.
9.3(0.0) Introduced on the M I/O Aggregator with the PMUX module.
Usage
Information
An FCoE map is a template used to map FCoE and FC parameters in a converged fabric. An FCoE map
is used to virtualize upstream FC ports on an FN2210S Aggregator with the PMUX module NPIV proxy
gateway so that they appear to downstream server CNA ports as FCoE forwarder (FCF) ports on an
FCoE network. When applied to FC and Ethernet ports on an NPIV proxy gateway, an FCoE map allows
the switch to operate as an FCoE-FC bridge between an FC SAN and an FCoE network by providing
FCoE-enabled servers and switches with the necessary parameters to log in to a SAN fabric.
On an FN2210S Aggregator a with the PMUX module NPIV proxy gateway, you cannot apply an FCoE
map applied on fabric-facing FC ports and server-facing 10–Gigabit Ethernet ports.
An FCoE map consists of the following parameters: the dedicated FCoE VLAN used for storage traffic,
the destination SAN fabric (FC-MAP value), FCF priority used by a server, and the FIP keepalive (FKA)
advertisement timeout.
In each FCoE map, the fabric ID, FC-MAP value, and FCoE VLAN parameters must be unique. Use one
FCoE map to access one SAN fabric. You cannot use the same FCoE map to access different fabrics.
To remove an FCoE map from an Ethernet interface, enter the no fcoe-map map-name command in
Interface configuration mode.
Related
Commands
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in FCoE maps.
feature fc
Enables the Fibre channel communication via the NPG functionality.
Syntax
feature fc
Command Modes CONFIGURATION
Supported Modes Programmable-Mux (PMUX)
Full–Switch
Default Enabled
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aaggregator.
Usage
Information
The command is supported only in FN2210S Aggregator.
802 NPIV Proxy Gateway