White Papers

To remove the asset tag, use the no stack-unit unit-id Asset-tag ID command.
Parameters
stack-unit unit-id Enter the keywords stack-unit then the unit-id to assign a tag to the
specific member. The range is from 0 to 5.
Asset-tag ID Enter a unique asset-tag ID to assign to the stack member. This option accepts a
maximum of 10 characters, including all special characters except double quotes. To
include a space in the asset-tag, enter a space within double quotes.
Defaults No asset-tag is assigned.
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
Related
Commands
show system— Displays the current status of all stack members or a specific member.
banner exec
Configure a message that is displayed when your enter EXEC mode.
Syntax
banner exec c line c
Parameters
c Enter the keywords banner exec, then enter a character delineator, represented
here by the letter c. Press ENTER.
line Enter a text string for your banner message ending the message with your
delineator. In the following example, the delineator is a percent character (%); the
banner message is “testing, testing”.
Defaults No banner is displayed.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Optionally, use the banner exec command to create a text string that displays when you accesses
EXEC mode. The exec-banner command toggles that display.
Example
Dell(conf)#banner exec ?
LINE c banner-text(max length 255) c, where 'c' is a delimiting
character
Dell(conf)#banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
4d21h5m: %STKUNIT0-M P:CP %SEC-5-LOGOUT: Exec session is terminated for
user on
line console
78 Control and Monitoring