White Papers

• show diag
• show environment
• show inventory
• show memory
• show processes cpu
• show processes ipc flow-control
• show processes memory
• show reset-reason
• show revision
• show server-interfaces
• show system
• show tech-support
• show uplink brief
• show util-threshold cpu
• show util-threshold memory
• ssh-peer-stack-unit
• telnet
• telnet-peer-stack-unit
• terminal length
• terminal monitor
• terminal xml
• trace route
• undebug all
• virtual-ip
• write
asf-mode
Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.
Syntax
asf-mode stack-unit {unit-id | all} queue size
To return to standard Store and Forward mode, use the no asf-mode stack unit command.
Parameters
unit-id Enter the stack member unit identifier of the stack member to reset. The range is
from 0 to 5 or all.
queue size Enter the queue size of the stack member. The range is from 0 to 5.
Defaults Not configured
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
You must save the configuration and reload the system to implement ASF. When you enter the command,
the system sends a message stating that the new mode is enabled when the system reloads.
asset-tag
Assign and store a unique asset-tag to the stack member.
Syntax
asset-tag stack-unit unit id Asset-tag ID
Control and Monitoring 77