White Papers

advertise med softphone-voice
To advertise softphone to enable IP telephony on a computer so that the computer can be used as a phone, configure the
system.
Syntax
advertise med softphone-voice {vlan-id} | {priority-tagged number}
To return to the default, use the no advertise med softphone-voice {vlan-id} |
{priority-tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
priority-tagged
number
Enter the keywords priority-tagged then the Layer 2 priority. The range is
from 0 to 7.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command
History
9.9(0.0) Introduced on the FN IOM.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
advertise med streaming-video
To advertise streaming video services for broadcast or multicast-based video, configure the system. This command does not
include video applications that rely on TCP buffering.
Syntax
advertise med streaming-video {vlan-id} | {priority-tagged number}
To return to the default, use the no advertise med streaming-video {vlan-id} |
{priority-tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
priority-tagged
number
Enter the keywords priority-tagged then the Layer 2 priority. The range is
from 0 to 7.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command
History
9.9(0.0) Introduced on the FN IOM.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
Link Layer Discovery Protocol (LLDP) 759