White Papers

To return to the default, use the no advertise med location-identification
{coordinate-based value | civic-based value | ecs-elin value} command.
Parameters
coordinate-based
value
Enter the keywords coordinate-based then the coordinated based location in
hexadecimal value of 16 bytes.
civic-based value Enter the keywords civic-based then the civic based location in hexadecimal
format. The range is from 6 to 255 bytes.
ecs-elin value Enter the keywords ecs-elin then the Emergency Call Service (ecs) Emergency
Location Identification Number (elin) numeric location string. The range is from 10
to 25 characters.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command
History
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
● ECS — Emergency call service such as defined by TIA or the national emergency numbering
association (NENA)
● ELIN — Emergency location identification number, a valid North America Numbering Plan format
telephone number supplied for ECS purposes.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
advertise med power-via-mdi
To advertise the Extended Power via MDI TLV, configure the system.
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command
History
9.9(0.0) Introduced on the FN IOM.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered, LLDP-MED
endpoint device.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
758 Link Layer Discovery Protocol (LLDP)