White Papers

Field Description
Link-bundle
trigger threshold
Threshold value that is the checkpoint, exceeding which the link bundle is marked
as being overutilized and alarm is generated
LAG bundle
number
Number of the LAG bundle
Utilization (In
Percent)
Traffic usage in percentage of the packets processed by the port channel
Alarm State Indicates whether an alarm is generated if overutilization of the port channel
occurred. Possible values are Active and Inactive
Interface Slot and port number, and the type of the member interface of the port channel
Line Protocol Indicates whether the interface is administratively up or down
Utilization (In
Percent)
Traffic usage in percentage of the packets processed by the particular member
interface
Example
Dell#show link-bundle-distribution port-channel
Link-bundle trigger threshold - 60
LAG bundle - 1 Utilization[In Percent] - 0 Alarm State -
Inactive
Interface Line Protocol Utilization[In Percent]
Te 0/5 Up 0
show port-channel-flow
Display an egress port in a given port-channel flow.
Syntax
show port-channel-flow port-channel number incoming-interface interface
{ src-mac address dest-mac address {vlan vlanid | ether-type }} [ src-ip
address dest-ip address ] [ src-port number dest-port number ]
Parameters
port-channel
number
Enter the keywords port-channel then the number of the port channel to
display flow information. The range is from 1 to 128.
incoming-
interface
interface
Enter the keywords incoming-interface then the interface type and slot/port
or number information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
src-mac address Enter the keywords src-mac then the MAC source address in the
nn:nn:nn:nn:nn:nn format.
dest-mac address Enter the keywords dest-mac then the MAC destination address in the
nn:nn:nn:nn:nn:nn format.
vlan vlan-id Enter the keyword vlan then the VLAN ID. The range is from 1 to 4094.
ether-type Enter the keywords ether-type then the ether-value in the XX:XX format.
src-ip address Enter the keywords src-ip then the IP source address in IP address format.
dest-ip address Enter the keywords dest-ip then the IP destination address in IP address format.
src-port number Enter the keywords src-port then the source port number. The range is from 1
to 65536. The default is None.
dest-port number Enter the keywords dest-port then the destination port number. The range is
from 1 to 65536. The default is None.
Command Modes EXEC
Link Aggregation Control Protocol (LACP) 731