White Papers

256M bytes of boot flash memory.
1 34-port GE/TE (XL)
56 Ten GigabitEthernet/IEEE 802.3 interface(s)
Command Fields
Lines
Beginning
With
Description
Dell Force10
Network...
Name of the operating system
Dell Force10
Operating...
OS version number
Dell Force10
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Force10
uptime is...
Amount of time the system has been up
System image... Image file name
Chassis Type: System type (M I/O Aggregator)
Control
Processor:...
Control processor information and amount of memory on processor
256M bytes... Amount of boot flash memory on the system
1 34 Port Hardware configuration of the system, including the number and type of physical
interfaces available
upgrade boot
Upgrade the bootflash image or bootselector image.
Syntax
upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 |
all} {booted | flash: |ftp: | tftp: | usbflash:} (A: | B:}
Parameters
all Enter the keyword all to change both the bootflash and bootselecter images.
bootflash-image Enter the keywords bootflash-image to change the bootflash image.
bootselector-
image
Enter the keywords bootselector-image to change the bootselector image.
0–5 Enter the keyword 0–5 to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member stack-units.
booted Enter the keyword booted to upgradefrom the current image in the M I/O
Aggregator.
ftp: After entering the keyword ftp:, you can either follow it with the location of
the source file in this form: //userid:password@hostip/filepath or press
Enter to launch a prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it with the location of the
source file in this form: //hostlocation/filepath or press Enter to launch a
prompt sequence.
72 File Management