White Papers

metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric value that
is consistent with the destination protocol. The range is from 0 to 16777215. The
default is 0.
metric-type
{external|
internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
● external
● internal
route-map map-
name
map-name is an identifier for a configured route map. The route map filters
imported routes from the source routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you specify a
keyword, but fail to list route map tags, no routes are imported.
Defaults IS-IS Level 2 routes only
Command Modes
● ROUTER ISIS (for IPv4)
● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
BGP to IS-IS redistribution supports “match” options using route maps. You can set the metric value,
level, and metric-type of redistributed routes by the redistribution command. You can “set” more
advanced options using route maps.
Example
Dell(conf)#router is
Dell(conf-router_isis)#redistribute bgp 1 level-1 metric 32 metric-type
external route-map rmap-isis-to-bgp
Dell(conf-router_bgp)#show running-config isis
!
router isis
redistribute bgp 1 level-1 metric 32 metric-type external route-map
rmap-isis-to-bgp
redistribute ospf
Redistribute routing information from an OSPF process.
Syntax
redistribute ospf process-id [level-1| level-1-2 | level-2] [match
{internal | external}] [metric metric-value] [metric-type {external |
internal}] [route-map map-name]
To return to the default values, use the no redistribute ospf process-id [level-1|
level-1-2 | level-2] [match {internal | external}] [metric metric-value]
[metric-type {external | internal}] [route-map map-name] command.
Parameters
process-id Enter a number that corresponds to the OSPF process ID to be redistributed. The
range is from 1 to 65355.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric value that
is consistent with the destination protocol. The range is from 0 to 16777215. The
default is 0.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
● external
● internal
Intermediate System to Intermediate System (IS-IS) 709