White Papers

The configured password injects into Level 1 LSPs, CSNPs, and PSNPs.
Related
Commands
● domain-password — allows you to set the authentication password for a routing domain.
● isis password — allows you to configure an authentication password for an interface.
clear config
Clear IS-IS configurations that display under the router isis heading of the show running-config command output.
Syntax
clear config
Command Modes ROUTER ISIS
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
CAUTION: Use caution when you enter this command. Back up your configuration prior to
using this command or your IS-IS configuration will be erased.
clear isis
Restart the IS-IS process. All IS-IS data is cleared.
Syntax
clear isis [tag] {* | database | traffic}
Parameters
tag (Optional) Enter an alphanumeric string to specify the IS-IS routing tag area.
* Enter the keyword * to clear all IS-IS information and restart the IS-IS process.
This command removes IS-IS neighbor information and IS-IS LSP database
information and the full SPF calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP mapping.
nsap Enter a specific NSAP address that is associated with the name parameter.
Defaults Not configured.
684 Intermediate System to Intermediate System (IS-IS)