White Papers

best Path
source: I - internal, a - aggregate, c - confed-external, r -
redistributed, n -
network Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path
h dead:1::/100 5ffe:10::3 1 00:03:20 1 i
h dead:1::/100 5ffe:11::3 1 00:03:20 1 i
h dead:4::/100 5ffe:10::3 1 00:04:39 1 i
h dead:4::/100 5ffe:11::3 1 00:04:39 1 i
Dell#
show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are announced from the same
neighbor AS but with a different AS-Path.
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length [advertised-
routes | dampened-routes | detail | flap-statistics | routes]]
Parameters
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length
in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
advertised-
routes
(OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on
dampened routes from the BGP neighbor.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on
the neighbor’s routes.
detail (OPTIONAL) Display detailed neighbor information.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible
routes.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
IPv6 Border Gateway Protocol (IPv6 BGP) 669