White Papers

Paramters
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast community
View information on all routes with community attributes or view specific BGP community groups.
Syntax
show ip bgp ipv6 unicast community [community-number] [local-as] [no-
export] [no-advertise]
Paramters
community-
number
Enter the community number in AA:NN format where AA is the AS number (2
bytes) and NN is a value specific to that autonomous system. You can specify up to
eight community numbers to view information on those community groups.
local-AS Enter the keywords local-AS to view all routes with the COMMUNITY attribute
of NO_EXPORT_SUBCONFED. All routes with the NO_EXPORT_SUBCONFED
(0xFFFFFF03) community attribute must not be advertised to external BGP peers.
no-advertise Enter the keywords no-advertise to view all routes containing the well-known
community attribute of NO_ADVERTISE. All routes with the NO_ADVERTISE
(0xFFFFFF02) community attribute must not be advertised to other BGP peers.
no-export Enter the keywords no-export to view all routes containing the well-
known community attribute of NO_EXPORT. All routes with the NO_EXPORT
(0xFFFFFF01) community attribute must not be advertised outside a BGP
confederation boundary.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp ipv6 unicast
summary command. The text line above the route table states the number of COMMUNITY attributes
found.
show ip bgp ipv6 unicast community-list
View routes that are affected by a specific community list.
Syntax
show ip bgp ipv6 unicast community-list community-list-name
Paramters
community-list-
name
Enter the name of a configured IP community list.
Command Modes
● EXEC
● EXEC Privilege
666 IPv6 Border Gateway Protocol (IPv6 BGP)