White Papers

show ip bgp ipv6 unicast extcommunity-list
View information on all routes with Extended Community attributes.
Syntax
show ip bgp ipv6 unicast extcommunity-list [list name]
Parameters
list name Enter the extended community list name you wish to view.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp ipv6 unicast
summary command. The text line above the route table states the number of COMMUNITY attributes
found.
The show ip bgp ipv6 unicast community command without any parameters lists BGP routes
with at least one BGP community attribute and the output is the same as for the show ip bgp ipv6
unicast command output.
show ip bgp ipv6 unicast filter-list
View the routes that match the filter lists.
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast flap-statistics
View flap statistics on BGP routes.
Syntax
show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-length]
[filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format then the prefix length in the /x
format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
filter-list as-
path-name
(OPTIONAL) Enter the keywords filter-list then the name of a configured
AS-PATH ACL.
IPv6 Border Gateway Protocol (IPv6 BGP) 645